午夜福利男女XX00动态图

<span id="nzohj"><blockquote id="nzohj"><b id="nzohj"></b></blockquote></span>
    聯系我們 關于我們

    剪板機折彎機怎樣保養?

    對于剪板機折彎機,我們應怎樣來進行保養工作呢?為什么提出這個問題,其主要原因,是因為前面還沒有講到,所以今天就利用一篇文章的篇幅,來具體和詳細進行闡述,以便使得大家能夠清楚明白,從而可以在實際中更好來進行這項工作。
    The shear bending machine, we should be how to carry out maintenance work? Why ask this question, the main reason is because the front is not talked about, so today by the length of an article to specific and detail so that everyone can clearly understand, which can better in practice to carry out this work.
    剪板機折彎機,其保養工作的內容有:
    Shear bending machine, the maintenance work contents:
    (1)其換油工作,初次的話,應在設備工作滿一個月來進行,之后是每年進行一次。并且,在換油時,同時還要對油箱進行清洗才行。
    (1) the change of work, for the first time it should be in the equipment work for a full month, then once a year. And, in the oil, but also on the tank for cleaning.
    (2)其所使用的液壓油牌號,應根據實際情況來確定。
    (2) the use of hydraulic oil brand, should be determined based on the actual situation.
    (3)應隨時注意系統油溫,正常應在35℃—60℃這一范圍內,高不能超過70℃。
    (3) should always pay attention to the oil temperature, normally at 35 C and 60 C in this range, the maximum not more than 70 DEG C.
    (4)其進行油液更換的同時,要對過濾器進行徹底地清洗。
    (4) the oil to replace the same time, the filter must be thoroughly cleaned.
    (5) 剪板機折彎機使用一個月后,應檢查油管彎曲處有無變形。使用兩個月過后,應檢查緊固件是否緊固。
    (5) after the plate bending machine is used for a month, it should check whether there is no deformation in the pipe bend. Use two months later, should check whether the fastener.

    剪板機折彎機的保養

    熱門產品

    新的資訊

    午夜福利男女XX00动态图